New

Paint booth + drying chamber Sima Jupiter

Posted today - Reference: 9490-001
  • Sima Jupiter
  • Category: Remaining transport
€ 3.500 Excluding VAT

Paint booth + drying chamber

Make: Sima

Model: Jupiter

Conditions: Functional on inventory day

Paint booth Jupiter type: 

Dimensions: 8 x 4.5 x 3 m 

Spray temperature: 20°c 

Drying temperature: 80°c

Realization walls / ceiling: insulated rock wool of 50 mm: powder coated white / white execution

Slinding door double type 1000 x 3000 mm 1 part in sidewall 1 

Double 4-Door service door in the front wall of the cabin 4,000 x 3,000 mm 

Filter ceiling + V600 G filters full surface 

Plenum height 1000 mm 

Number of light boxes: 12 parts in the sidewall/rear + 4 lights per light box

Insertion group: Mounted on the side behind the cabin 

G36 LD blowing unit: 36,000 m³/hour – 11 kW Gas burner

Oil burner: Rielllo 350,000 kcal/h Pre-filter box with pre-filter included 

Extraction group G36 LD . 36,000 m³/h – 11 kW 

Manual overpressure control

Includes compressed air shut-off valve

G36 LD control cabinet included 

Included: all exterior + chip extractor unit tube up to 9 m high + chip extractor unit cover + blowing tube up to 10 m high + venturi  cover

Monorail transport system: ROB Make to transport constructions inside and outside the cabin (curves, switches, stops, supports 2 breakers included)

Cross-beams: length of 3500 mm and distance between wheels of 2500 mm, buffer distance 250 mm: 5 parts included in the lot

Not included: 30 cross-beams of 3500 mm available (for sale separately according to offer)  

Industrial drying chamber type Jupiter 7 x 4.5 x 3.5 meters

The drying chamber is equipped with a partial filter ceiling that avoids any turbulence. 

The ventilation is SEMI-vertical. The greatest impurities in the air are separated by the pre-filters. The air is then introduced into the part via ceiling filters (fine filters). 

The heating can only be switched on if ventilation working. Any normal or occasional shutdown of ventilation results in an immediate shutdown of heating. 

The drying chamber working in recycling, the air is largely recycled. The percentage of recycled air is 85-90%, so fresh air is 15-10%, in order to avoid the accumulation of solvents or water vapors. The accumulation of solvents must be avoided in order not to reach the safe explosion limit and to obtain a good polymerization thanks to the painting applied to the object. 

Due to the principle of recycling, heating is very economical (much less energy is consumed than during the spraying phase). The set temperature is reached quickly. The air is recycled through the filters. Technical aggregates and ducts are designed in such a way that there is no significant increase in pressure. With this principle, water-based paintings can dry faster.  

Height: 3500 mm + plenum height 1,000 mm (total height 4500 mm)  

Ventilation unit

The group is installed next to the drying room on a chip extractor unit base. 

The extraction base is 1,800 x 500 mm. 

A filter is mounted in front of the extraction base. 

Technical Specifications: G18L Fan type: ADN 450 Nominal flow rate group: 18,000 m³/h EX low pressure fan Input engine: 5.5 Kw Fan speed: 1,500 rpm 

Make and type Gas burner: Riello BS4 Power: 178 kW – 200,000 kcal/h 

Noise level: 78 dB(A)

Type of filters: G3 (EU 3)


Remarks: Recommended visit

Dismantling and logistics to be provided by the buyer



The price stated is the staring price / highest bid.
The auction starts from 05-02-2025 until 19-02-2025
Pickup city: Kuurne, Belgium

Category Remaining transport
Brand Sima
Model Jupiter
Reference 9490-001

Similar ads